VEP4600 Operating System Installation Guide
VEP4600 overview
The VEP4600 platform is a one rack unit, x86-based networking platform running virtualized universal customer premise equipment (uCPE) functions and basic switching/routing functions as a top-of-rack device with 4, 8, or 16 cores.
- Platform status icon LEDs
- RS-232 ports (top) and 10/100/1000 Base-T ports (bottom)
- SFP+ ports
- Luggage tag
- 1000 Base-T networking ports
- Processor power on/off button
- Micro USB-B port
- USB Type A ports
For detailed information about the VEP4600 platform, see the following documents at https://www.dell.com/support:
- BMC User Guide
- BIOS User Guide
- VEP4600 Installation Guide
- VEP4600 Setup Guide
- uCPE Networking DIAG OS Guide
This document describes the steps for OS installation on a VEP4600 device. The OS installation steps are tested and verified on the VEP4600 device with the OS versions listed below:
- DiagOS image: diagos-recovery-x86_64-dellemc_vep4600_d21xyt-r0.3.41.3.81-9.iso
- Ubuntu OS image: ubuntu-18.04.3-live-server-amd64.iso
- Adva OS image: SVCS_connector-18.4.1.31-18.4-factory-dell-45.iso
- ESXi 6.7 OS image: VMware-VMvisor-Installer-6.7.0.update03-16316930.x86_64-DellEMC_Customized-A06.iso
- ESXi 7.0 OS image: VMware-VMvisor-Installer-7.0.0-16324942.x86_64-DellEMC_Customized-A02.iso
NOTE:For systems running ESXi, BIOS shell, FreeBSD, Linux, or Windows, you can download the X722 firmware version 5.00 package from the
Drivers & Downloads tab of the
Dell Networking VEP4600 support page at
www.dell.com/support. Follow the instruction in the
readme.tx to complete the update. Before you update, read and agree to the Intel License Agreement.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\