Wyse Management Suite uses the following port as the default port for the applications that are installed:
About this task
Apache Tomcat: 443
MariaDB database: 3306
Mongo database: 27017
MQTT Broker: 1883
Memcached: 11211
Software vault: 9443
EMSDK: 5172, 49159—optional and required only to manage Teradici devices
It is recommended that you use the default port for one or more of the preceding services. If you have a port conflict and are unable to use the default port, Wyse Management Suite enables you to change the default port during installation.
To use a non-default port for one or more of the preceding services, use
Custom install option during Wyse Management Suite installation. The option that is listed in the following screen enables you to use the local database for MongoDB and MariaDB or use the remotely installed database:
NOTE:You can configure only the Tomcat connection port 49159 for Teradici. You cannot configure the device port 5172.
For more information about the custom installation, see the Custom installation section in
Dell Wyse Management Suite 2.x Quick Start Guide at
support.dell.com/manuals.
Change the Tomcat service port
This section explains how to change the port after installing Wyse Management Suite. Reinstall using Custom installation mode to change ports. If reinstallation is not an option, the following sections explain the procedure to change the ports manually:
Prerequisites
To change the Tomcat service port, do the following:
Steps
Stop the Tomcat service. The Tomcat service is identified by
Dell WMS: Tomcat Service entry.
Edit the file
<INSTALLDIR>\Tomcat-9\conf\server.xml in a text editor.
Find and replace all occurrences of port entry 443 with the port number you need to use. It is optional to change the references to port 8443.
Save the
server.xml file and exit.
Start the Tomcat service.
Enter the port number in the URL (default port 443 can be omitted from the URL), For example,
https://xyz.wysemanagementsuite.com:553/ccm-web. The port that is specified in the URL must be used for both portal access and for device registration.
NOTE:The Memcached port can be changed during Wyse Management Suite installation. Dell recommends not to change the Memcached port detail after installation.
Change the MQTT port
Steps
Stop the Tomcat and MQTT services.
Perform the following steps to configure the MQTT broker service:
Edit the file
<INSTALLDIR>\wmsmqtt\mqtt.conf
in a text editor.
Note the following entries:
# Port to use for the default listener
#port 1883
Uncomment the
port 1883 entry and change the port number to your preferred port. For example,
port 2883.
Save the file, and start the MQTT broker service.
Check the following entry to confirm that the MQTT broker service is running on the new port:
ps> get-nettcpconnection –LocalPort 2883
To configure Tomcat, do the following:
Open a command prompt session, and go to
cd C:\Program Files\DELL\WMS\MongoDB\bin.
Start Tomcat Service identified in
Local Services as
Dell WMS: Tomcat Service and re-register all the devices, so that the MQTT URL is referring to the new port.
Change the MariaDB port
Steps
Start the Tomcat service and stop the MariaDB service. To configure the MariaDB, do the following:
Edit the file
<INSTALLDIR>\Database\SQL\my.ini
in a text editor.
Change the port number for both mysqld and client to your preferred port. The port numbers should be of the same value. For example:
[mysqld]
datadir=C:/Program Files/DELL/WMS/Database/SQL
port=3308
[client]
port=3308
Save the file, and start the MariaDB service.
To configure Tomcat, do the following:
Edit the file
<INSTALLDIR>\Tomcat-8\webapps\ccm-web\WEB-INF\classes\bootstrap.properties in a text editor.
Update the properties in the file with your preferred port number details. For example:
Save the file, and start the Tomcat service. Verify that the services are running on the configured port. For example:
ps>get-nettcpconnection –LocalPort 3308
Change the MongoDB database port
Steps
Stop the Tomcat and MongoDB services.
To configure the MongoDB port entry, do the following:
Edit the file
<INSTALLDIR>\MongoDB\mongod.cfg
in a text editor.
Update the property in the file with your preferred port number. For example:
port=27027.
Save the file, and start the MongoDB service. Confirm that it is running on the new port.
To configure Tomcat, do the following:
Edit the file
<INSTALLDIR>\Tomcat-8\webapps\ccm-web\WEB-INF\classes\bootstrap.properties in a text editor.
Update the properties in the file with your preferred port number. For example:
mongodb.seedList=localhost\:27027.
Save the file, and start the Tomcat service. Verify that the service is running on the required port. For example:
ps>get-nettcpconnection –LocalPort 27027.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\