XPS 13 Service Manual

Procedure

1. Remove the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board.
2. Lift the wireless antenna and camera cable bracket from the system board.
3. Disconnect and lift the camera cable from the system board, peeling off the tape securing the camera cable to the fans.
   
4. Disconnect the right fan cable from the system board.
5. Disconnect the left fan cable from the system board.
6. Remove the two screws (M1.6x3) that secure the left and right fan to the system board.
7. Lift the left and right fans along with their cables off the system board.