Installing a
1.8-inch SSD in a 1.8-inch SSD carrier
CAUTION: Many
repairs may only be done by a certified service technician. You should
only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by
Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the
SSD from a SSD carrier to replace a faulty SSD from a SSD carrier.
Follow the safety guidelines listed
in safety instructions section.
Remove a 1.8-inch SSD from a 1.8-inch
SSD carrier.
Insert the SSD into the SSD carrier with the
connector end of the SSD toward the back. When aligned correctly,
the back of the SSD is flush with the back of the SSD carrier.
Figure 1. Installing a
1.8-inch SSD in a 1.8-inch SSD carrier
SSD carrier
SSD
No hay datos disponibles para el tema
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Seleccione si el artículo le ha resultado útil o no.
Los comentarios no pueden contener caracteres especiales: <>()\
