Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Blink SSD Cache

Description

The start locate command identifies the Solid State Disks (SSDs) that are being used in the SSD cache by turning on the indicator lights for the SSDs. The stop locate command turns off the indicator lights on the SSDs.

Syntax Applicable To Starting A Blink Operation

start ssdCache [
                                 ssdCacheName] locate

Syntax Applicable To Stopping A Blink Operation

stop ssdCache locate

Parameter

Parameter	Description
`ssdCache`	The alphanumeric identifier (including - and _) of the SSD cache that you want to locate. Enclose the identifier in square brackets ([ ]). If the SSD cache name contains special characters or consists only of numbers, you also must enclose the identifier in double quotation marks (" ") inside square brackets.