Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Save Storage Array Events

Description

This command saves events from the Major Event Log (MEL) to a file.

Any or all of the following events can be saved:

  • Critical events—Errors occurring on the storage array that needs to be addressed immediately. Loss of data access may occur if the error is not immediately corrected.
  • Warning events—Errors occurring on the storage array resulting in degraded performance or reduced ability to recover from additional errors. Access to data has not been lost, but the must be corrected to prevent possible loss of data access in the event of an additional error.
  • Informational events—Events occurring on the storage array that do not impact normal operations. This event is reporting a change in configuration or other information useful in evaluating the performance of the storage array.
  • Debug events—Events occurring on the storage array that provides information useful in determining steps or states that led to the error. This information may be useful to your Technical Support representative in helping determine error causes.
  • NOTE: Some storage arrays may be unable to support all the above mentioned types of events.

Syntax

save storageArray (allEvents | criticalEvents | warningEvents | infoEvents | debugEvents) file="filename" [count=numberOfEventsforceSave=(TRUE
                                 | FALSE)]

Parameters

Parameter Description 
allEvents
 Saves all events to a file. 
criticalEvents
 Saves only critical events to a file. 
warningEvents
 Saves only warning events to a file. 
infoEvents
 Saves only informational events to a file. 
debugEvents
 Saves only debug events to a file. 
file
 Specifies name of the file to which to save the events. You must put quotation marks (" ") around the file name. 
count
 Specifies the number of events or critical events to save to a file. If you do not enter a value for the count, all events or critical events are saved to the file. If you enter a value for the count, only that number of events or critical events (starting with the last event entered) are saved to the file. Use integer values. 
forceSave
 When set to TRUE, force saves all critical events to a file. Default value is FALSE.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"