Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Show SSD Cache

Description

This command displays information about the SSD cache.

Syntax

show ssdCache [
                                 ssdCacheName]

Parameter

Parameter	Description
`ssdCache`	The alphanumeric identifier (including - and _) of the SSD cache for which you want to get information. Enclose the identifier in square brackets ([ ]). If the SSD cache name contains special characters or consists only of numbers, you also must enclose the identifier in double quotation marks (" ") inside square brackets.

Notes

This command returns the SSD cache information similar to this example.

SSD Cache name: my_cache

`Status:`	`Optimal`
`Type:`	`Read Only`
`I/O characteristic type:`	`File System`
`Maximum capacity allowed:`	`1,862.645 GB`
`Current capacity:`	`557.792 GB`
`Additional capacity allowed`	`1,304.852 GB`
`Physical disk capacities:`	`All 278.896 GB`

`Data Service (DS) Attributes`
`Security capable:`	`No`
`Secure:`	`No`
`Data Assurance (DA) capable:`	`No`

`Associated physical disks:`
`Enclosure`	`Slot`
`0`	`4`
`0`	`11`
`Virtual disks using SSD cache:`	`virtualDisk_test`