Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Set Host Channel

Description

This command defines the loop ID for the host channel.

Syntax

set hostChannel [
                                 hostChannelNumber]
                                 preferredID=
                                 portID

Parameters

Parameter

Description

hostChannel

The identifier number of the host channel for which you want to set the loop ID.

The host channel identifier number is constructed by combining the RAID controller module number and the host channel number. Enclose the host channel identifier number in square brackets ([ ]). Separate the RAID controller module number from the host channel number with a comma.

For example, the identifier number for host channel 2 on RAID controller module 0 would be [0,2].

preferredID

The port identifier for the specified host port. Port ID values are 0 to 127.