Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

cfgSerialConsoleQuitKey (Read or Write)

Description

This key or key combination terminates the Virtual Console text for CMC.

Legal value:

String of up to 2 characters

This key specifies the character that ends the serial text console connect (or racadm connect) command.

NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously with another key to generate a character.

For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted as ^\.

Configuration options: The value must start with the ^ character, and must follow one of the characters — a-z, A-Z, [,], \

In the input command, use \ without the quotes. For example:

config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\

Default:

NOTE: For more information about running the RACADM commands for special characters, see Guidelines to Quote Strings Containing Special Characters .