Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Displays power management status information.

To use this subcommand, you must have CMC Login User privilege.

Synopsis

racadm getpminfo

Example

racadm getpminfo

[Real-Time Power Statistics]
                                                System Input Power                     = 89 W (303 BTU/h)
                                                Peak System Power                      = 93 W (317 BTU/h)
                                                Peak System Power Start Time           = 20:26:06 03/04/2014
                                                Peak System Power Timestamp            = 20:28:32 03/04/2014
                                                Minimum System Power                   = 83 W (283 BTU/h)
                                                Minimum System Power Start Time        = 20:26:06 03/04/2014
                                                Minimum System Power Timestamp         = 20:28:02 03/04/2014
                                                System Idle Power                      = 89 W (303 BTU/h)
                                                System Potential Power                 = 417 W (1422 BTU/h)
                                                System Input Current Reading           = 0.6 A
                                             

[Real-Time Energy Statistics]
                                                System Energy Consumption              = 62.2 kWh
                                                System Energy Consumption Start Time = 15:56:11 02/12/2014
                                                System Energy Consumption Timestamp  = 06:07:07 03/05/2014
                                             

[System Power Status]
                                                Chassis Power State                    = ON
                                                Overall Power Health                   = OK
                                                Redundancy                             = Yes
                                             

[System Power Policy Configuration]
                                                System Input Power Cap                 = 3371 W (11502 BTU/h | 100%)
                                                Redundancy Policy                      = Redundancy Alerting Only
                                             

[Power Budgeting]
                                                System Input Max Power Capacity        = 2382 W
                                                Input Redundancy Reserve               = 0 W
                                                Power Available for Server Power-on    = 1965 W