Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Verifies that the destination IPv6 address is reachable from a CMC, or with the current routing-table contents. A destination IPv6 address is required. An ICMP echo packet is sent to the destination IPv6 address based on the current routing-table contents.

To use this subcommand for CMC, you must have the Administrator privilege.

Synopsis

racadm ping6 <
                                                ipv6address>
                                             

Example

racadm iping6 192.168.0.2

IPING6 192.168.0.2 (192.168.0.2): 56 data bytes

64 bytes from 192.168.0.2: icmp_seq=0 ttl=121 time=2.9
                                                ms
                                             

--- 192.168.0.2 ping statistics ---

1 packets transmitted, 1 packets received, 0 percent
                                                packet loss
                                             

round-trip min/avg/max = 2.9/2.9/2.9 ms