iDRAC9 with Lifecycle Controller Version 3.36.36.36 Redfish API Guide

Supported Action — BootToISOFromVFlash

Description

The BootToISOFromVFlash action is used to boot to the downloaded pre-operating system image on the vFlash SD card. The following table lists the return values for BootToISOFromVFlash action, where the action-execution behavior matches the return-code description.

URL

/redfish/v1/Dell/Systems/System.Embedded.1/DellOSDeploymentService/Actions/DellOSDeploymentService.BootToISOFromVFlash

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
POST	Login

Supported Parameters


Parameter	Type	Value	Description
ExposeDuration	DateTimeOffset		Identifies the amount of time, up to 18 hours, for the drivers to be exposed as a USB device to the host. The default value shall be 18 hours, if the parameter is not specified. The format for intervals is: YYYY-MM-DDThh:mm:ss[.SSS](Z\|(+\|-)hh:mm).

Supported Status Codes


HTTP Status Code	Extended Information	Error Message Code
200	Base.1.0.Success	OSD1
400		OSD19, OSD21, OSD3, OSD36, OSD40, OSD41, OSD43, OSD50, OSD51, OSD52, OSD53, OSD55, OSD9

Bienvenue

Bienvenue dans l’univers Dell