- Notes, cautions, and warnings
- Overview
- Built in iDRAC and PowerEdge Security
- Securely Configuring iDRAC Web Server
- Securely Using TLS/SSL Certificate
- Federal Information Processing Standards (FIPS)
- Secure Shell (SSH)
- Network Security Configuration
- Interfaces and Protocols to Access iDRAC
- iDRAC Port Configuration
- IPMI and SNMP Security Best Practices
- Secure Enterprise Key Manager (SEKM) Security
- iDRAC9 Group Manager
- Virtual Console and Virtual Media Security
- VNC Security
- User Configuration and Access Control
- Configuring Local Users
- Disabling Access to Modify iDRAC Configuration Settings on Host System
- iDRAC User Roles and Privileges
- Superroot User
- Recommended Characters in Usernames and Passwords
- Password Strength Policy
- Secure Default Password
- Changing the Default Login Password using Web Interface
- Force Change of Password (FCP)
- Simple 2-Factor Authentication (Simple 2FA)
- RSA SecurID Two Factor Authentication (2FA) iDRAC9 Datacenter
- Active Directory
- LDAP
- Customizable Security Banner
- System Lockdown Mode
- Securely Configuring BIOS System Security
- Secure Boot Configuration
- Securely Erasing Data
- LCD Panel
- Server Inventory, Lifecycle Log, Server Profiles, and Licenses Import and Export
- Security Events Lifecycle Log
- Default Configuration Values
- Network Vulnerability Scanning
- Security Licensing
- Field Service Debug (FSD)
- Best Practices
- Appendix - White papers
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Profitez de récompenses et de remises réservées aux membres
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
iDRAC9 Security Configuration Guide
LDAP
iDRAC provides a generic solution to support Lightweight Directory Access Protocol (LDAP)-based authentication. This feature does not require any schema extension on your directory services.
To make iDRAC LDAP implementation generic, the commonality between different directory services is used to group users and then map the user-group relationship. The directory service-specific action is the schema. For example, they may have different attribute names for the group, user, and the link between the user and the group. These actions can be configured in iDRAC.
The Certificate Settings page in iDRAC GUI is used to configure the digital certificate that is used during initiation of SSL connections when communicating with a generic LDAP server; these communications use LDAP over SSL (LDAPS). Certificate validation is a recommended security configuration. When enabled, it is necessary to upload the certificate of the Certificate Authority (CA) that issued the certificate that is used by the LDAP server during initiation of SSL connections. The CA's certificate is used to validate the authenticity of the certificate provided by the LDAP server during SSL initiation.
| Certificate Validation | Select Enabled to enable certificate validation. |
| If enabled, iDRAC uses the CA certificate to validate the LDAP server certificate during SSL handshake. If disabled, iDRAC skips the certificate validation step of the SSL handshake. You can disable the certificate validation for testing purpose or if you choose to trust the domain controllers in the security boundary without validating their SSL certificates. |
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\