- Notes, cautions, and warnings
- Working on your computer
- Chassis
- Disassembly and reassembly
- Technology and components
- System setup
- Troubleshooting
- Getting help
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Profitez de récompenses et de remises réservées aux membres
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Dell OptiPlex 5055 Small Form Factor Owner's Manual
Flashing the BIOS from the F12 One-Time boot menu
Updating your system BIOS using a BIOS update .exe file copied to a FAT32 USB key and booting from the F12 one time boot menu.
BIOS UpdateUpdating from the One-Time Boot Menu
You can run the BIOS update file from Windows using a bootable USB key or you can also update the BIOS from the F12 One-Time boot menu on the system.
Most Dell systems built after 2012 have this capability and you can confirm by booting your system to the F12 One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your system. If the option is listed, then the BIOS supports this BIOS update option.
- NOTE: Only systems with BIOS Flash Update option in the F12 One-Time Boot Menu can use this function.
To update your BIOS from the F12 One-Time boot menu, you will need:
- USB key formatted to the FAT32 file system (key does not have to be bootable)
- BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB key
- AC power adapter connected to the system
- Functional system battery to flash the BIOS
Perform the following steps to execute the BIOS update flash process from the F12 menu:
- Power on the system and press the F12 key to access the One-Time
Boot Menu, Highlight BIOS Flash Update using the arrow keys then
press
Enter.
- The Bios flash menu will open then click the browse button.
- The E5450A14.exe file is shown as an example in the following screenshot. The actual file name may vary.
- Once the file is selected, it will show in the file selection box and
you can click the OK button to continue.
- Click the
Begin Flash Update button.
- A warning box is displayed asking you if you want to proceed. Click
the Yes button to begin the flash.
- At this point the BIOS flash will execute, the system will reboot
and then the BIOS flash will start and a progress bar will show the
progress of the flash. Depending on the changes included in the
update, the progress bar may go from zero to 100 multiple times and
the flash process could take as long as 10 minutes. Generally this
process takes two to three minutes.
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\