Dell Wyse ThinOS Version 8.5 Administrator’s Guide

Configuring the Caradigm Vault server

1. From the desktop menu, click System Setup, and then click Remote Connections.
   The Remote Connections dialog box is displayed.
2. Click the Authentication tab, click the Caradigm button, enter the IP address of the SSO & CM Server, and then click OK.
3. On the Caradigm Vault Server, use the following guidelines:
   • Ensure that the Enroll unenrolled badges option is checked.

   • Make sure that all Badge ID mapping entries are deleted.

   
4. Click SSO&CM > Advanced Configurations , and use the following guidelines:
   
   1. Ensure that the Enable Proximity Support check box is selected.
   2. Ensure that the Enable way2care check box is selected.
5. To prepare a certificate to the Caradigm Vault Server, use the following guidelines:
   The Caradigm Vault Server uses the certificate to validate the connection between the Tap Server and the thin client.
   1. To raise a request for the certificate:
      • The certificate should be issued by your Certificate Authority.
      • Prepare the certificate in two formats:
        • PFX format which has a private key.
        • The other is PEM format which is text-based, Base64-encoded DER file. For Example, Caradigm.cer, Caradigm.pfx.
   2. To import a certificate to the thin client, use either of the following two options:
      • Click System Setup > System tools > Certificates to import certificates from USB storage or file server.
      • Use INI file to import certificate.

        AddCertificate=client_cert.pfx password=passpass

   3. To add a certificate to Vault server:
      
      Use the Thin Client Certificates page to add certificates for the thin client devices. The certificate must be a text in PEM format, that is, a text-based Base64-encoded DER file.

      • Open the DER cert file on Notepad.
      • Log in to the Vault Server Admin Console, and then click Appliance > Thin Client Certificates.
      • Copy the Notepad text to the Vault server