Ugrás a fő tartalomra
  • Rendelésfeladás gyorsan és egyszerűen
  • Rendelések megtekintése és a kiszállítási állapot követése
  • Terméklista létrehozása és elérése
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E5450 / 5450 Owner's Manual

Removing the System Board

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove:
    1. SD card

    2. base cover

    3. battery

    4. memory

    5. hard-drive assembly

    6. keyboard trim

    7. keyboard

    8. palmrest

    9. display-hinge brackets

    10. display assembly

  3. Disconnect the speaker cable [1] and release the speaker cable from its routing channels [2]. Figure displaying how to remove the speaker cable and how to release the speaker cable from its routing channel.
  4. Remove the screws that secure the system board to the chassis.Figure displaying how to remove the screws that secure the system board to the chassis.
  5. Remove the system board from the computer.Figure displaying how to remove the system board from the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\