Passa al contenuto principale
Esci

Benvenuto in Dell

Il mio account
  • Effettua gli ordini in modo rapido e semplice
  • Visualizza gli ordini e monitora lo stato della spedizione
  • Crea e accedi a un elenco dei tuoi prodotti
  • Gestisci i siti, i prodotti e i contatti per livello di prodotto di Dell EMC tramite l'amministrazione della società.
Accedi Crea un account Accesso a Premier Accesso al Partner Program
Contattaci

I tuoi carrelli Dell.com

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Parsing rules

  • All lines that start with '#' are treated as comments. A comment line must start in column one. A '#' character in any other column is treated as a '#' character. Some modem parameters may include # characters in its string. An escape character is not required. You may want to generate a .cfg from a racadm getconfig -f <filename> .cfg command, and then perform a racadm config -f <filename> .cfg command to a different iDRAC, without adding escape characters. Example:

    #

    # This is a comment

    [cfgUserAdmin]

    cfgUserAdminPageModemInitString=<Modem init # not a comment>

  • All group entries must be surrounded by " [" and " ]" characters. The starting " [" character denoting a group name must start in column one. This group name must be specified before any of the objects in that group. Objects that do not include an associated group name generate an error. The configuration data is organized into groups as defined in the iDRAC8 RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals. The following example displays a group name, object, and the object’s property value.

    [cfgLanNetworking] -{group name}

    cfgNicIpAddress=143.154.133.121 {object name}

  • All parameters are specified as "object=value" pairs with no white space between the object, =, or value.

    White spaces that are included after the value are ignored. A white space inside a value string remains unmodified. Any character to the right of the '=' is taken as is (for example, a second '=', or a '#', '[', ']', and so forth). These characters are valid modem chat script characters.

    See the example in the previous bullet.

    The racadm getconfig -f <filename> .cfg command places a comment in front of index objects, allowing the user to see the included comments.

    To view the contents of an indexed group, use the following command:

    racadm getconfig -g <groupName> -i <index 1-16>

  • For indexed groups the object anchor must be the first object after the "[ ]" pair. The following are examples of the current indexed groups:

    [cfgUserAdmin]

    cfgUserAdminIndex=11

    If you type racadm getconfig -f < myexample >.cfg, the command builds a .cfg file for the current iDRAC configuration. This configuration file can be used as an example and as a starting point for your unique . cfg file.

Classifica questo contenuto

Preciso
Utile
Facile da comprendere
Questo articolo ti è stato d'aiuto?
0/3000 characters
  Fornisci una valutazione (1-5 stelle).
  Fornisci una valutazione (1-5 stelle).
  Fornisci una valutazione (1-5 stelle).
  Indica se l'articolo è stato utile o meno.
  I commenti non possono contenere i seguenti caratteri speciali: <>() \