Passa al contenuto principale
Esci

Benvenuto in Dell

Il mio account
  • Effettua gli ordini in modo rapido e semplice
  • Visualizza gli ordini e monitora lo stato della spedizione
  • Crea e accedi a un elenco dei tuoi prodotti
  • Gestisci i siti, i prodotti e i contatti per livello di prodotto di Dell EMC tramite l'amministrazione della società.
Accedi Crea un account Accesso a Premier Accesso al Partner Program
Contattaci

I tuoi carrelli Dell.com

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Scheduling automatic firmware update using web interface

To schedule automatic firmware update using web Interface:
  • NOTE: Do not create the next scheduled occurrence of an automatic update job if a job is already Scheduled. It overwrites the current scheduled job.
  1. In the iDRAC web interface, go to Overview > iDRAC Settings > Update and Rollback . The Firmware Update page is displayed.
  2. Click the Automatic Update tab.
  3. Select the Enable Automatic Update option.
  4. Select any of the following options to specify if a system reboot is required after the updates are staged:
    • Schedule Updates — Stage the firmware updates but do not reboot the server.
    • Schedule Updates and reboot Server — Enables server reboot after the firmware updates are staged.
  5. Select any of the following to specify the location of the firmware images:
    • Network — Use the catalog file from a network share (CIFS or NFS). Enter the network share location details.
      • NOTE: While specifying the network share settings, it is recommended to avoid special characters for user name and password or percent encode the special characters.
    • FTP — Use the catalog file from the FTP site. Enter the FTP site details.
  6. Based on the selection in step 5, enter the network settings or the FTP settings. For information about the fields, see the iDRAC Online Help.
  7. In the Update Window Schedule section, specify the start time for the firmware update and the frequency of the updates (daily, weekly, or monthly). For information about the fields, see the iDRAC Online Help.
  8. Click Schedule Update. The next scheduled job is created in the job queue. Five minutes after the first instance of the recurring job starts, the job for the next time period is created.

Classifica questo contenuto

Preciso
Utile
Facile da comprendere
Questo articolo ti è stato d'aiuto?
0/3000 characters
  Fornisci una valutazione (1-5 stelle).
  Fornisci una valutazione (1-5 stelle).
  Fornisci una valutazione (1-5 stelle).
  Indica se l'articolo è stato utile o meno.
  I commenti non possono contenere i seguenti caratteri speciali: <>() \