Dell PowerEdge T320 Systems Owner's Manual

Opening The System

NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
If applicable, rotate the system feet inward and lay the system on its side on a flat, stable surface.
- NOTE: For systems installed with the wheel assembly, ensure that you lay the system on a sturdy surface with the wheel assembly extending off the edge of the surface.
Using a screwdriver, rotate the latch release lock on the system cover counter clockwise to the unlocked position.
Press the cover release latch and lift the cover away from the system.
Figure 1. Opening and Closing the System
1. cover release latch
2. latch release lock
3. system cover
4. system feet (4)