Passa al contenuto principale
  • Effettua gli ordini in modo rapido e semplice
  • Visualizza gli ordini e monitora lo stato della spedizione
  • Crea e accedi a un elenco dei tuoi prodotti
  • Gestisci i siti, i prodotti e i contatti per livello di prodotto di Dell EMC tramite l'amministrazione della società.

Dell PowerEdge M830 (For Dell PowerEdge VRTX Enclosure) Owner's Manual

Front panel view—2.5-inch hard drive or SSD system

Figure 1. Front panel view—2.5 inch hard drive or SSD system
This figure shows the front-panel features and indicators of the 2.5 inch hard drive or SSD system.
Table 1. Front panel features and indicators—2.5-inch hard drive or SSD systemThis table describe the front panel features and indicators of the 2.5-inch hard drive or SSD system
ItemIndicator, Button, or ConnectorIconDescription
1Hard drives or SSDsFour 2.5-inch hot-swappable SAS/SATA/PCIe SSDs or SAS/SATA hard drives.
2USB portUSB 3.0 connector iconEnables you to connect USB devices to the server module.
3USB management port or iDRAC Direct portUSB management port/iDRAC Direct icon

Enables you to connect USB devices to the server module or provides access to the iDRAC Direct features. For more information about iDRAC, see the iDRAC Guide at Dell.com/idracmanuals.

4Management indicatorThe management indicator glows when the iDRAC controls the USB connector for management functions.
5Status indicatorIndicates the status of the system.
6Server module power-on indicator, power buttonPower-on indicator iconThe power-on indicator glows when the server module is turned on. The power button controls the power supply output to the system.
7Server module handleUsed to slide the server module out of the enclosure.

Classifica questo contenuto

Preciso
Utile
Facile da comprendere
Questo articolo ti è stato d'aiuto?
0/3000 characters
  Fornisci una valutazione (1-5 stelle).
  Fornisci una valutazione (1-5 stelle).
  Fornisci una valutazione (1-5 stelle).
  Indica se l'articolo è stato utile o meno.
  I commenti non possono contenere i seguenti caratteri speciali: <>() \