CAUTION: Many
repairs may only be done by a certified service technician. You should
only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by
Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove processor blank
and DIMM blank when installing four processors or service other components
inside the system.
Follow the safety guidelines listed in the Safety
instructions section.
Follow the procedure listed in the Before working
inside your system section.
Steps
Hold the processor blank and DIMM blank by its
edges and lift it away from the system.
Figure 1. Removing a processor
blank and DIMM blank
processor blank and DIMM blank
heat sink retention socket (4)
standoff (4)
Next steps
Install the processor and the heat
sink.
If you are removing a processor permanently,
install the processor blank.
Follow the procedure listed in the After working
inside your system section.
Non sono disponibili i dati per l'argomento
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Indica se l'articolo è stato utile o meno.
I commenti non possono contenere i seguenti caratteri speciali: <>() \
