메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell OpenManage Server Administrator Version 8.5 Command Line Interface Guide

PDF

Omconfig Chassis Info Or Omconfig Mainsystem Info

Use the omconfig chassis info or omconfig mainsystem info command to enter an asset tag name and a chassis name for the system. For a blade systems, enter asset tag names for modular components as well. The following table displays the valid parameters for the command:

Table 1. Valid Parameters Of Omconfig Chassis Info Or Omconfig Mainsystem Info . This table lists the Valid Parameters Of Omconfig Chassis Info Or Omconfig Mainsystem Info
name=value pair Description
index=< n> Number of the chassis whose asset tag or name you are setting.
tag=< text>

Asset tag in the form of alphanumeric text. Letters or numbers should not exceed 10 characters.

  • NOTE: The parameter is not supported on 13G and later systems. For setting the asset tag, use omconfig chassis biossetup attribute=assetag seting=<value>.
name=< text> Name of the chassis.
In the following example, the asset tag for the main system chassis is being set to buildsys: 
omconfig chassis info index=0 tag=buildsys
or 
omconfig mainsystem info index=0 tag=buildsys
Index 0 always defaults to the main system chassis. The following command omits index=n, but accomplishes the same: 
omconfig chassis info tag=buildsys
or 
omconfig mainsystem info tag=buildsys
An acceptable command, when executed, results in the following message: 
Chassis info set successfully.
For some chassis, you can assign a different name. You cannot rename the main system chassis. In the following example, the command renames chassis 2 from storscsi1 to storscsia: 
omconfig chassis info index=2 name=storscsia
or 
omconfig mainsystem info index=2 name=storscsia

As with other commands, the CLI issues an error message if you do not have a chassis 2 (the main chassis=0). The CLI allows you to issue commands only for the system configuration you have.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.