Dell OpenManage Server Administrator Version 8.5 Command Line Interface Guide

Omconfig Rebuild Physical Disk

Table 1. omconfig Rebuild Physical Disk . The following table describes the syntax and sample syntaxes for the omconfig Rebuild Physical Disk command.
Description	Rebuilds a failed physical disk. Rebuilding a disk may take several hours. If you need to cancel the rebuild, use the Cancel Rebuild task. For more information about Rebuild Physical Disk, see the Dell OpenManage Online Help.
Syntax	`omconfig storage pdisk action=rebuild controller=id pdisk=< PDISKID>`, where id is the controller ID. The <PDISKID> variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.
Example to	Rebuild physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers	`omconfig storage pdisk action=rebuild controller=1 pdisk=0:3`
Example for SAS controllers	`omconfig storage pdisk action=rebuild controller=1 pdisk=0:2:3`