Dell OpenManage Server Administrator Version 8.5 Command Line Interface Guide

Omreport Chassis Slots Or Omreport Mainsystem Slots

Use the omreport chassis slots or omreport mainsystem slots command to view properties of the system’s slots. Type:

omreport chassis slots index=n

omreport mainsystem slots index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays properties for all of the slots in the system. If you specify the index, Server Administrator displays properties for a specific slot.

NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user scripts as applicable.

For each slot in the system, values display for the following fields given in the following table:

Table 1. Valid Parameters Of Omreport Chassis Slots Or Omreport Mainsystem Slots . This table lists the Valid Parameters Of Omreport Chassis Slots Or Omreport Mainsystem Slots
Field	Description
Index	Number of the slot in the system.
Slot ID	Silk screen name printed on the system's motherboard next to the slot. Alphanumeric text uniquely identifies each slot in the system.
Adapter	Name and/or type of the card that fits into the slot, for example, a storage array controller, SCSI adapter, iDRAC Enterprise, or HBA.
Data Bus Width	Width, in bits, of the information pathway between the components of a system. The range of the data bus width is from 16 to 64 bits.

환영

환영합니다.

Dell OpenManage Server Administrator Version 8.5 Command Line Interface Guide

Omreport Chassis Slots Or Omreport Mainsystem Slots

본 콘텐츠를 평가해주십시오.