Dell OpenManage Server Administrator Version 8.5 Command Line Interface Guide

Omconfig Reset Controller Configuration

Table 1. Omconfig Reset Controller Configuration. The following table describes the process to reset the controller configuration.
Description	Resets the controller configuration. CAUTION: Resetting a configuration permanently destroys all data on all virtual disks attached to the controller. System or boot partition residing on these virtual disks is destroyed. You may receive a warning message if this command results in deleting the system or boot partition. However, this warning message is not generated always. Ensure that you do not delete the system or boot partition or other vital data when using this command.
Syntax	`omconfig storage controller action=resetconfig controller=id`, where `id` is the controller ID as reported by the omreport storage controller command. In some circumstances, you may receive a warning message if this command deletes the system or boot partition. You can override this warning by using the force=yes parameter. In this case, the syntax is as follows: omconfig storage controller action=resetconfig controller=id force=yes
Example to	Reset the configuration on controller 1.
Example	`omconfig storage controller action=resetconfig controller=1`