메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell PowerEdge R730 Owner's Manual

PDF

Expansion card installation guidelines

Depending on your system configuration, the following PCI Express (PCIe) generation 3 expansion cards are supported:
Table 1. Supported expansion cardsItem 1 is the PCIe slot 1, on Riser 1 and is connected to Processor 2, it supports a low profile, half length 8x card. The slot width is 16x. Item 2 is the PCIe slot 2, on Riser 1 and is connected to Processor 2, it supports a low profile, half length 8x card. Item 3 is the PCIe slot 3, on Riser 1 and is connected to Processor 2, it supports a low profile, half length 8x card. The slot width is 16x. Item 4 is the PCIe slot 4, on Riser 2 and is connected to Processor 2, it supports a full height, full length 16x card. The slot width is 16x. Item 5 is the PCIe slot 5, on Riser 2 and is connected to Processor 1, it supports a full height, full length 8x card. The slot width is 16x. Item 6 is the PCIe slot 6, on Riser 3 and is connected to Processor 1, it supports a full height, full length 16x card. The slot width is 16x (alternate).
PCIe slot Riser Processor connection Height Length Link width Slot width
1 1 Processor 2 Low Profile Half Length x8 x16
2 1 Processor 2 Low Profile Half Length x8 x16
3 1 Processor 2 Low Profile Half Length x8 x16
4 2 Processor 2 Full Height Full Length x16 x16
5 2 Processor 1 Full Height Full Length x8 x16
6 3 (default) Processor 1 Full Height Full Length x8 x16
6 3 (alternate) Processor 1 Full Height Full Length x16 x16
7 3 (default) Processor 1 Full Height Full Length x8 x16
NOTE: To use PCIe slots 1 through 4 on the risers 1 and 2, both the processors must be installed.
NOTE: The expansion card slots are not hot-swappable.

The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be installed in the card priority and slot priority order.

Table 2. Expansion card installation order The table describes the slot priority for expansion card installation.
Card priority Card type Slot priority Max allowed
1 GPU (double width) 6, 4 2
GPU (single width) 6, 4, 7, 5 4
2 RAID H830 7, 6, 4, 5 2
RAID H830 (low profile) 3, 2 2
3 100G Intel Omni-Path Architecture Host (OPA) Channel Adapters (HCA) 4, 6 2
14 Gb InfiniBand, Fourteen Data Rate (FDR) HCA 3, 2, 1 3
40 Gb NICs (full height) 5, 7, 4, 6 4
40 Gb NICs (low profile) 3, 2, 1 3
25 Gb NICs (full height) 4, 6, 5 3
25 Gb NICs (low profile) 3, 2, 1 3
4 FC16 HBA (full height) 5, 7, 4, 6 4
FC16 HBA (low profile) 2, 3, 1 3
5 10 Gb NICs (full height) 5, 7, 4, 6 4
10 Gb NICs (low profile) 2, 3, 1 3
6 FC8 HBA (full height) 5, 7, 4, 6 4
FC8 HBA (low profile) 2, 3, 1 3
7 1 Gb NICs (full height) 5, 7, 4, 6 4
1 Gb NICs (low profile) 2, 3, 1 3
8 12 Gb SAS (low profile) 3, 2, 1 2
12 Gb SAS (full height) 6, 4, 5, 7 2
9 Integrated RAID integrated slot 1
10 NDC integrated slot 1
NOTE: Ensure that the 100 G OPA x16 card is installed in slot 6 (x16 PCIe) on the alternate riser 3.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.