Dell Precision Tower 5810/7810/7910 and Rack 7910 Serial PCIe-Card Setup Guide
Setting up the Serial Add-In-Card
This section describes in brief on how to install the serial add-in-card on a Dell Precision Tower 5810, 7810, 7910, and Rack 7910.
Jumper Setting on a Serial PCIe-Card
| J6 (Serial 1) | |
| 1–2 | 5 V |
| 3–4 | RI (DEFAULT) |
| 5–6 | 12V |
| J65 (Serial 1) | |
| 1–2 | 5 V |
| 3–4 | DCD (DEFAULT) |
| 5–6 | 12V |
- The setting 1-2 will provide a 5V Power Serial port.
- The setting 3-4 will provide a Standard Serial port.
- The setting 5-6 will provide a 12V Power Serial port.
- Default is a standard serial port (3-4).
- Install serial card software before installing the Add-In-Card
(AIC). NOTE: To download the drivers for install on both Windows operating system and Linux operating system, go to dell.com/support.
- For Precision Tower 7910: the Serial AIC is placed in the slots CPU1-1, CPU1-3, CPU1-4, CPU2-1, CPU2-2.
- For Precision Tower 5810/Tower 7810: the Serial AIC is placed in slot 1, 3, 4, 5.
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\