- Notes, cautions, and warnings
- Dell PowerEdge C4130 overview
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- Boot Settings
- Network Settings
- System Security
- System Information
- Memory Settings
- Processor Settings
- SATA Settings
- Integrated Devices
- Serial Communication
- System Profile Settings
- Miscellaneous Settings
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- System covers
- Inside the system - PowerEdge C4130
- Chassis intrusion switch
- IDSDM
- Cooling shroud
- Processor blank
- System memory
- Processors and heat sinks
- System battery
- PCIe shroud
- Expansion card riser and expansion cards
- Power supply units
- Hard drives
- Removing the optional 2.5 inch hard drive cage
- Installing the optional 2.5 inch hard drive cage
- Removing the optional 2.5 inch hard drive cage cover
- Installing the optional 2.5 inch hard drive cage cover
- Removing 2.5 inch cabled hard drives from the hard drive cage
- Installing a 2.5 inch cabled hard drive into the hard drive cage
- Hard drive cabling diagrams
- uSATA SSDs
- Removing a 1.8 inch uSATA SSD blank
- Installing a 1.8 inch uSATA SSD blank
- Removing a 1.8 inch uSATA SSD carrier
- Installing a 1.8 inch uSATA SSD carrier
- Removing a 1.8 inch uSATA SSD from a SSD carrier
- Installing a 1.8 inch uSATA SSD into a SSD carrier
- Removing the 1.8 inch uSATA SSD cage
- Installing the 1.8 inch uSATA SSD cage
- Removing the 1.8 inch uSATA SSD backplane
- Installing the 1.8 inch uSATA SSD backplane
- Internal USB memory key (optional)
- Cable routing clip
- System board
- Trusted Platform Module
- Cooling fans
- Graphics processing unit
- PCIe Graphics processing unit
- GPU installation guidelines
- Removing a GPU blank
- Removing a GPU riser cable from the system board
- Removing a GPU
- Removing a GPU riser cable board
- Removing the custom GPU brackets from the GPUs removed from your system
- Removing the GPU brackets from the replacement GPUs
- Removing the optional GPU switch board
- Installing the optional GPU switch board
- Installing the GPU brackets on the GPUs removed from your system
- Installing the custom GPU brackets on the replacement GPUs
- Installing a GPU riser cable board
- Installing a GPU blank
- Installing a GPU
- Installing a GPU riser cable on the system board
- GPU cabling diagrams
- SXM2 Graphics processing unit
- Control panel module
- Using system diagnostics
- Jumpers and connectors
- Troubleshooting your system
- Troubleshooting system startup failure
- Troubleshooting external connections
- Troubleshooting the video subsystem
- Troubleshooting a USB device
- Troubleshooting a serial input and output device
- Troubleshooting a NIC
- Troubleshooting a wet system
- Troubleshooting a damaged system
- Troubleshooting the system battery
- Troubleshooting power supply units
- Troubleshooting cooling problems
- Troubleshooting cooling fans
- Troubleshooting system memory
- Troubleshooting an internal USB key
- Troubleshooting a micro SD card
- Troubleshooting a drive or SSD
- Troubleshooting a storage controller
- Troubleshooting expansion cards
- Troubleshooting processors
- Troubleshooting a GPU
- System messages
- Getting help
Damos-lhe as boas-vindas
Damos-lhe as boas-vindas à Dell
Minha conta
- Efetuar encomendas de forma rápida e fácil
- Ver todas as encomendas e controlar o seu estado de expedição
- Criar e aceder a uma lista dos seus produtos
- Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Dell PowerEdge C4130 Owner's Manual
Expansion card installation guidelines
Depending
on your system configuration, the following PCI Express (PCIe) generation
3 expansion cards are supported:
| Configuration | PCIe slot | Processor connection | Height | Length | Link width | Slot width |
|---|---|---|---|---|---|---|
| Four PCIe GPUs with switch
board and one processor (Configuration A) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | Processor 1 | Low Profile | Half Length | x16 | x16 | |
| Four PCIe GPUs with switch
board and two processors (Configuration B) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | Processor 1 | Low Profile | Half Length | x16 | x16 | |
| Four PCIe GPUs without switch
board and two processors (Configuration C) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | Processor 2 | Low Profile | Half Length | x8 | x16 | |
| Two PCIe GPUs without switch
board and two processors (Configuration D) |
1 | Processor 1 | Low Profile | Half Length | x16 | x16 |
| 2 | Processor 2 | Low Profile | Half Length | x16 | x16 | |
| Two PCIe GPUs without switch
board and one processor (Configuration E) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | NA | NA | NA | NA | NA | |
| Two PCIe GPUs without switch
board and two processors (Configuration F) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | Processor 2 | Low Profile | Half Length | x8 | x16 | |
| Four PCIe GPUs with switch
board with dual GPU virtual mode and two processors (Configuration G) |
1 | Processor 1 | Low Profile | Half Length | x16 | x16 |
| 2 | Processor 2 | Low Profile | Half Length | x16 | x16 | |
| Three PCIe GPUs without switch
board and two processors (Configuration H) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | Processor 2 | Low Profile | Half Length | x8 | x16 | |
| Three PCIe GPUs without switch board and
two processors (Configuration I) |
1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | NA | NA | NA | NA | NA | |
| Four SXM2 GPUs with NVLink
board and two processors (Configuration K) | 1 | Processor 1 | Low Profile | Half Length | x8 | x16 |
| 2 | Processor 1 | Low Profile | Half Length | x16 | x16 |
NOTE: Configuration G supports virtual mode. In the virtual mode, GPUs 1 and 2 are connected to processor 1 and GPUs 3 and 4 are connected to processor 2.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. Expansion cards should be installed in the card priority and slot priority order mentioned in table.
NOTE: The x16 link width riser cards on the expansion card riser are cabled to the system board.
NOTE: For configuration K, the x16 link width riser card on the expansion card cage is cabled to the NVLink board.
NOTE: The expansion card slots are not hot swappable.
| Category | Card priority | Card type | Configurations A and B | Configurations C, F, and H | Configurations D and G | Configurations E and I | Configuration K | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Slot priority | Max allowed | Slot priority | Max allowed | Slot priority | Max allowed | Slot priority | Max allowed | Slot priority | Max allowed | |||
| RAID | 1 | H730P (low profile) | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - |
| 2 | H730 (low profile) | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | |
| 3 | H330 (low profile) | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | |
| H330 (low profile) IEC | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | ||
| 4 | H830 (low profile) | 1, 2 | 2 | 1,2 | 2 | 1,2 | 2 | 1 | 1 | 1 | 1 | |
| 5 | H810 (low profile) | 1, 2 | 2 | 1,2 | 2 | 1,2 | 2 | 1 | 1 | 1 | 1 | |
| 6 | 12 GB SAS HBA (low profile) | 1, 2 | 2 | 1,2 | 2 | 1,2 | 2 | 1 | 1 | - | - | |
| Non-RAID | HBA330 adapter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | |
| Infiniband | Mellanox dual port card | 2 | 1 | n/a | 0 | 1,2 | 2 | n/a | 0 | 2 | 1 | |
| Mellanox single port card | 2 | 1 | n/a | 0 | 1,2 | 2 | n/a | 0 | 2 | 1 | ||
| Mellanox dual port adapter | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| Mellanox single port adapter | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| Intel low profile card | 2 | 1 | n/a | n/a | 1, 2 | 1 | n/a | n/a | 2 | 1 | ||
| Fiber channel | QLogic dual port 16 Gbps Fibre Channel adapter | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | |
| Emulex dual port 16 Gbps Fibre Channel adapter | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| QLogic single port 16 Gbps Fibre Channel adapter | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| Emulex single port 16 Gbps Fibre Channel adapter | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| Emulex FC8 low profile card | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| QLogic FC8 low profile card | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| 10 Gb NICs | 10 Gb NICs (low profile) | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | |
| 10 Gb SFP+ NICs (low profile) | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1,2 | 2 | ||
| PCIe SSD | NVMe half height, half length | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1 | 1 | |
| PCIe half height, half length | 1, 2 | 2 | 1, 2 | 2 | 1, 2 | 2 | 1 | 1 | 1 | 1 | ||
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\