Avançar para o conteúdo principal
Terminar sessão

Damos-lhe as boas-vindas à Dell

Minha conta
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Iniciar sessão Criar uma conta Início de sessão Premier Início de sessão no programa de parceiros
Contacte-nos

Dell PowerEdge C4130 Owner's Manual

PDF

Replacing the optional internal USB memory key

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Remove the PCIe shroud. 
  4. If installed, disconnect the expansion card riser cables from the system board.
  5. Remove the expansion card riser. 

Steps

  1. Locate the USB port or USB memory key on the system board.
    To locate the USB port, see the System board jumpers and connectors section.
  2. If installed, remove the USB memory key from the USB port.
    Figure 1. Removing the internal USB memory key
    This figure shows removing the internal USB memory key.
    1. USB memory key
    2. USB port
  3. Insert the replacement USB memory key into the USB port.
    Figure 2. Installing the internal USB memory key
    This figure shows installing the internal USB memory key
    1. USB memory key
    2. USB port

Next steps

  1. Install the expansion card riser.
  2. If installed, connect the expansion card riser cables to the system board.
  3. Install the PCIe shroud.
  4. Follow the procedure listed in the After working inside your system section.
  5. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\