Avançar para o conteúdo principal
Terminar sessão

Damos-lhe as boas-vindas à Dell

Minha conta
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Iniciar sessão Criar uma conta Início de sessão Premier Início de sessão no programa de parceiros
Contacte-nos

Dell PowerEdge C4130 Owner's Manual

PDF

Installing the optional 2.5 inch hard drive cage

The PSU 2 slot also functions as the optional 2.5 inch hard drive cage slot. If you install the 2.5 inch hard drive cage in the PSU 2 slot, your system will not support the redundancy feature.

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Remove the PSU/PSU blank, if installed.
  4. Install the 2.5 inch hard drives in the hard drive cage.
  5. Route the power and signal cables through the hard drive cage slot.
  6. Keep the Phillips #1 screwdriver ready.

Steps

  1. Slide the hard drive cage into the hard drive cage slot in the chassis.
  2. Secure the hard drive cage to the hard drive cage slot by using the screws.
    Figure 1. Installing the 2.5 inch hard drive cage
    This image shows installing the 2.5 inch hard drive cage.
    1. PSU 1 slot
    2. PSU 2 slot/2.5 inch hard drive cage slot
    3. screw
    4. hard drive cage

Next steps

  1. Connect the power cable to the system board.
  2. Connect the signal cables to the system board or expansion card.
  3. Follow the procedure listed in the After working inside your system section.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\