Dell PowerEdge R320 Systems Owner's Manual

Installing The Control-Panel Module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

For a 3.5 inch cabled hard drive system:
1. Insert the LED panel into the slot in the chassis.
2. Secure the LED panel with the screws.
Insert the control-panel module into the slot in the chassis and align the two screw holes on the control-panel module with the corresponding holes on the chassis.
Secure the control-panel module with the screws.
Connect all the applicable cables to the control-panel module.
Close the system.
Install the control panel.
Reconnect the system and peripherals to their power sources, and turn them on.
If applicable, install the front bezel.