Dell PowerEdge R320 Systems Owner's Manual

Installing The Control Panel

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

If applicable, insert the control panel cable through the slot on the chassis.
- CAUTION: To avoid damaging the power LED, do not use excessive force.
Align the locking tabs on the control panel with the notches on the chassis and angle the control panel until it snaps into place. When properly seated, the control panel will be flush with the front panel.
- NOTE: For an eight 2.5 inch hard drive system, tighten the screw to secure the control panel to the bottom of the chassis.
Close the system.
Reconnect the system and peripherals to their power sources, and turn them on.
If applicable, install the front bezel.