Dell PowerEdge RAID Controller (PERC) S130 User’s Guide

PERC S130 specifications

The following table provides PERC S130 specifications:

Table 1. Specifications for PERC S130
Specification	PERC S130
SATA SSD technology	Yes
I/O controller	Intel X99 chipset
Communication with the system	Integrated
Communication with the end devices	SATA links
SAS connectors	No
SATA connectors	Discrete on the system board
Dell-compliant SATA compatibility	Yes
Dell-compliant SAS compatibility	No
Direct-connected end devices	Dell-compliant HDDs and SSDs
SMART error support through management applications	Yes
Backplane supported systems	Yes
Software-based RAID	Volume, RAID 1, RAID 0, RAID 5, RAID 10
Support for internal tape drive	Yes
Support for global hot spare	Yes
Maximum number of global hot spares	Varies with the number of free disks in the system
Pass through SSD support	Yes

The following table provides PERC S130 virtual disk specifications:

Table 2. Virtual disk specifications for PERC S130
Specification	PERC S130
Maximum number of virtual disks	10
Minimum virtual disk size	102MB
Maximum virtual disk size	No maximum size; there may be operating system size limitations
Maximum number of physical disks per virtual disk	10
Maximum number of virtual disks per physical disk	10
Maximum number of physical disks that can be concatenated	N/A
Maximum number of physical disks in a Volume	1
Maximum number of physical disks in a RAID 0	10
Maximum number of physical disks in a RAID 1	2
Maximum number of physical disks in a RAID 5	10
Maximum number of physical disks in a RAID 10	10
Minimum number of physical disks that can be concatenated	N/A
Minimum number of physical disks in a Volume	1
Minimum number of physical disks in a RAID 0	2
Minimum number of physical disks in a RAID 1	2
Minimum number of physical disks in a RAID 5	3
Minimum number of physical disks in a RAID 10	4

NOTE: The configurations listed in the table above may vary with the hard-drive backplane of the system that you have.