Install the Dell EqualLogic MEM kit on an ESXi-based host using the vSphere CLI
Prerequisites
Verify that the supported VMware ESXi software is installed and running. See the
PowerStore
Simple Support Matrix document at
https://www.dell.com/powerstoredocs.
About this task
NOTE:To avoid application disruption, move the ESXi host out of the cluster before installing the host plugin. After installing the host plugin and rebooting, re-join the ESXi host with the cluster. Virtual machines should be moved out from the installing host and moved back after the install. Also, to avoid multiple reboots, the Dell EqualLogic MEM kit install can be planned and combined with any other operating system reboot task.
To install the supported Dell EqualLogic MEM kit (see the
PowerStore
Simple Support Matrix document at
https://www.dell.com/powerstoredocs), do the following:
NOTE:To enable only MEM functionality, execute only steps 1, 2 and 6.
Steps
Download the latest version of the Dell EqualLogic MEM kit and associated installation guide from the Dell EqualLogic support site
https://eqlsupport.dell.com.
After login, the kit and its associated installation guide can be found under downloads for VMware Integration.