Dell Wyse Management Suite Version 1.3.1 Administrator’s Guide

Configuring global session settings—ThinOS 8.5 and later versions

Use the Global session settings page to configure VDI global settings for ThinOS 8.5 and later version devices.

Table 1. Configuring local resources settingsLocal resources settings
Option	Description
Map Printers	Select this option to automatically connect the local printers when the session starts.
Map Serials	Select this option to automatically connect the local serials when the session starts.
Map SmartCards	Select this option to redirect the smartcards to the remote session.
Map Sound	Select this option to enable the local system sound when the session starts.
Map Disks	Select this option to enable map disks. You can automatically connect the USB drives for ICA and RDP connections when the session starts.
Disks Read Only	Select this option to enable read-only disks.
Enable USB Redirection	Select this option to redirect the USB drives to the remote session. From the drop-down list, select your preferred option. If Exclude some devices option is selected, you can exclude the following devices from the session: Exclude disk devices Exclude audio devices Exclude printer devices Exclude video devices
Display on desktop (8.6+)	From the drop-down list, select your preferred option.
Enable Whitelist or Disable Blacklist	Use this option to enable whitelist or disable blacklist. By default, Do not enable whitelist or blacklist is selected. NOTE: The device restarts when you enable this option. The following options are displayed when you select Enable whitelist or Enable blacklist: Class USB Class Vendor ID

Table 2. Configuring advanced settingsAdvanced settings
Option	Description
Reconnect After Disconnect	Select this option to reconnect the connection automatically after the connection is disconnected.
Multi-Monitor	Select this option to enable the multi-monitor support. The height and width of the session desktop is similar to the local virtual desktop size.
Turn Compression off	Select this option to compress the file size and to reduce the time required to download the files.
Optimize for low link speed	Select the check box to optimize session settings for low link speed.
Full Screen Mode	Select this option to set the connection window in the full screen mode.
Fast Disconnect Key	Select this option to use the fast disconnect key. NOTE: To disconnect from the sessions, press the F12 key.