- Notes, Cautions, and Warnings
- About Your System
- Using The System Setup And Boot Manager
- Installing Blade Components
- Troubleshooting Your System
- Using system diagnostics
- Jumpers and connectors
- Technical Specifications
- System messages
- Getting help
You must select the boot mode in the Boot Mode field of the Boot Settings Screen of System Setup. Once you specify the boot mode, the system boots in the specified boot mode and you proceed then to install your operating system from that mode. Thereafter, you must boot the system in the same boot mode (BIOS or UEFI) to access the installed operating system. Trying to boot the operating system from the other boot mode will cause the system to halt at startup.