跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Alienware m15 R2 Service Manual

PDF

Removing the M.2 2230 solid-state drive

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

NOTE: This procedure applies only to computers shipped with a M.2 2230 solid-state drive installed.
NOTE: Depending on the configuration ordered your computer may have up to two M.2 cards installed. Supported card configurations per M.2 card slot:
  • M.2 2230 solid-state drive + 2230 mounting bracket
  • M.2 2280 solid-state drive

The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure.

Image: Removing the M.2 2230 solid-state drive

Steps

  1. Remove the screw (M2x3) that secures the M.2 thermal shield to the mounting bracket.
  2. Remove the M.2 2230 thermal shield from the M.2 2230 solid-state drive.
  3. Lift and remove the M.2 2230 solid-state drive from the M.2 card slot on the system board.
  4. Remove the screw (M2x3) that secures the M.2 2230 mounting bracket to the palm-rest assembly.
  5. Remove the M.2 2230 mounting bracket from the palm-rest assembly.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\