跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge C4130 Owner's Manual

PDF

Installing a cooling fan

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in before working inside your system.
  3. Remove the system top cover (front).

Steps

  1. Hold the cooling fan by the sides with the cable end facing the system board.

    CAUTION: Make sure the airflow arrows on the side of the fans are pointing to the rear of the chassis.  If the cooling fan is installed in reverse direction the system may overheat.

  2. Align the cooling fan with the slot on the chassis and slide the fan into the slot.
  3. Connect the cooling fan power cable to the cooling fan connector on the system board.
    Figure 1. Installing cooling fan
    This figure shows installing cooling fan.
    1. cooling fan (8)
    2. cooling fan power cable
    3. cooling fan connector on system board
    4. cooling fan slot

Next steps

  1. Install the system top cover (front).
  2. Follow the procedure listed in after working inside your system.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\