跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。

Dell PowerEdge C4130 Owner's Manual

Replacing the optional internal USB memory key

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Remove the PCIe shroud. 
  4. If installed, disconnect the expansion card riser cables from the system board.
  5. Remove the expansion card riser. 

Steps

  1. Locate the USB port or USB memory key on the system board.
    To locate the USB port, see the System board jumpers and connectors section.
  2. If installed, remove the USB memory key from the USB port.
    Figure 1. Removing the internal USB memory key
    This figure shows removing the internal USB memory key.
    1. USB memory key
    2. USB port
  3. Insert the replacement USB memory key into the USB port.
    Figure 2. Installing the internal USB memory key
    This figure shows installing the internal USB memory key
    1. USB memory key
    2. USB port

Next steps

  1. Install the expansion card riser.
  2. If installed, connect the expansion card riser cables to the system board.
  3. Install the PCIe shroud.
  4. Follow the procedure listed in the After working inside your system section.
  5. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎?
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助?請選擇。
  評語中不得包含下列特殊字元:<>()\