跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。

Dell PowerEdge C4130 Owner's Manual

Removing a cooling fan

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in before working inside your system.
  3. Remove the system top cover (front).

NOTE: The procedure for removing each fan is identical.

Steps

  1. Disconnect the cooling fan power cable from the system board.
  2. Hold the cooling fan by its edges and lift the cooling fan out of the chassis.
    Figure 1. Removing cooling fan
    This figure shows removing cooling fan.
    1. cooling fan (8)
    2. cooling fan power cable
    3. cooling fan connector on system board
    4. cooling fan slot

Next steps

  1. Install the cooling fan.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎?
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助?請選擇。
  評語中不得包含下列特殊字元:<>()\