Manuals & Documents
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#--/*
25 out of 29 shown
29 out of 29 shown
These Release Notes contain new features, code enhancements and fixes in Connectrix SANnav Release 2.2.1
Updated: August 08, 2022
Find guidelines about your product, system specifications, tools, setup options, troubleshooting tips and more
Updated: February 28, 2022
This document describes how Congestion Spreading (a.k.a, Slow Drain) can impact your Storgae Area Network (SAN), the metrics used to describe the severity of each type of congestion for both Connectrix B-Series and the MDS-Series as well as preventive measures that can be taken to avoid the effects of Congestion Spreading.
Updated: April 29, 2019
This document provides basic platform and component support for Blade Chassis Switch Modules. The EMC Simple Support Matrix represents complete product support statements in a simplified, all-in-one format. All supported configurations for a product or solution that are listed in the ESSM format do not require any additional E-Lab Navigator validation.
Updated: May 09, 2017
Provides a high-level overview of Fibre Channel SAN topologies, discusses simple and complex Fibre Channel SAN topologies, and provides case studies for Brocade Virtual Fabrics. FICON connectivity is also discussed.
Updated: February 16, 2017
This document describes the basic steps involved in troubleshooting SFP/connection issue and the steps taken to narrow down the root cause.
Updated: November 01, 2016
Focuses on case studies and provides a brief overview of FCoE, the supported configurations and features, and case studies to show how to incorporate EMC Connectrix B switches, Cisco Nexus switches, Blade Servers and Juniper QFX3500 switches utilizing FCoE into an existing data center.
Updated: April 14, 2016
This document provides data information for some EMC SAN products, including descriptions, system architecture, and management.
Updated: October 28, 2014
This guide describes the features and setup procedures for Apple Xsan host interface running Xsan FS to EMC Symmetrix and CLARiiON storage arrays over Fibre Channel and iSCSI and lists the features and recommended configurations to deploy Xsan on the Apple MAC OS X platform.
Updated: December 15, 2011
This document provides information on legacy SAN technologies.
Updated: April 07, 2011
This document provides data information for some vendor directors and switches, including descriptions, system architecture, and management. This document also provides installation guidelines and cabinet configuration examples.
Updated: April 07, 2011
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: February 01, 2009
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: February 01, 2009
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, DCX Model and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: February 01, 2009
This documentation set provides information on using the EMC Connectrix Manager application.
Updated: December 01, 2008
This documentation set provides information on using the EMC Connectrix Manager application.
Updated: October 01, 2008
This documentation set provides information for setting up, administering, and/or configuring the DS-5300B, DS-5100B, DS-300B, DS-32B2, DS-4100B, DS-4900B, DS-5000B, DS-220B and MP-7500B switches and the ED-48000B, AP-7600B, AP-7420B, Connectrix ED-DCX-B, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP4-18 blade,PB-48K-10G-6 blade, PB-DCX-16P blade, PB-DCX-32P blade, and the PB-DCX-48P blade.
Updated: July 01, 2008
This documentation set provides information for setting up, administering, and/or configuring the DS-5300B, DS-5100B, DS-300B, DS-32B2, DS-4100B, DS-4900B, DS-5000B, DS-220B and MP-7500B switches and the ED-48000B, AP-7600B, AP-7420B, Connectrix ED-DCX-B, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP4-18 blade,PB-48K-10G-6 blade, PB-DCX-16P blade, PB-DCX-32P blade, and the PB-DCX-48P blade.
Updated: July 01, 2008
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: July 01, 2008
This documentation set provides information for setting up, administering, and/or configuring the DS-5300B, DS-5100B, DS-300B, DS-32B2, DS-4100B, DS-4900B, DS-5000B, DS-220B and MP-7500B switches and the ED-48000B, AP-7600B, AP-7420B, Connectrix ED-DCX-B, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP4-18 blade,PB-48K-10G-6 blade, PB-DCX-16P blade, PB-DCX-32P blade, and the PB-DCX-48P blade.
Updated: July 01, 2008
The Brocade Fabric Manager Administrator’s Guide is intended for use by system administrators during installation and configuration of the DS-8B3, DS-16B3, DS32-B2, DS-4100B, and DS-220B switches and the ED-1200B, ED-2400B, and ED-4800B directors and the AP-7420B application platform.
Updated: March 12, 2008
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: March 04, 2008
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: March 04, 2008
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: March 04, 2008
This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.
Updated: March 04, 2008
This documentation set provides information on procedures for basic tasks of installing, setting up, administering, and/or configuring the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors and the PB-48KB-18i blade, PB48K-48 blade, and PB-48K-16IP blade.
Updated: March 01, 2007
These installation notes contain upgrade and installation instructions for the EMC FibreZoneBridge/ConnectrixBridge software.
Updated: January 01, 2007
These installation and service manuals are part of the Connectrix documentation set, and are intended for use by Customer Service engineers during installation and setup of the product.
Updated: December 06, 2003
Provides environmental requirements and chassis installation instructions for the Model DS-24M2 2-Gigabit Flex (8-, 16-, and 24-port) departmental switches.
Updated: November 04, 2002