Articoli
Valore inserito non valido. Utilizzare solo lettere, numeri e caratteri speciali, tranne <>)(%/;,=#-/*
30 su 141 visualizzato
141 su 141 visualizzato
Questo documento evidenzia le versioni del codice minimo, consigliato e più recente per i prodotti Dell Technologies Enterprise e Datacenter Infrastructure. Dell Technologies valuta e monitora attentamente i dati di implementazione del codice per garantire che le versioni dei prodotti soddisfino le sue rigorose aspettative di fornire ai clienti prodotti e soluzioni affidabili.
Aggiornato: maggio 25, 2026
ID: 000205512
Questo articolo della Knowledge Base fornisce la procedura per sostituire un membro della zona.
Aggiornato: maggio 22, 2026
ID: 000288932
Impossibile importare la policy MAPS utilizzando BNA sullo switch SAN.
Aggiornato: maggio 27, 2026
ID: 000052480
Come ripristinare uno slot da un messaggio EM-1045, CHASSIS, WARNING, Slot XX is being powered OFF (not enough power)?
Aggiornato: maggio 27, 2026
ID: 000022765
Procedure to customize the chassis name.
Aggiornato: maggio 20, 2026
ID: 000224253
After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.
Aggiornato: maggio 19, 2026
ID: 000218645
A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).
Aggiornato: maggio 19, 2026
ID: 000217788
Learn how to use PuTTY for SSH key-based authentication. Step-by-step instructions to create SSH keys, add SSH key to PuTTY, and connect with SSH key securely on Connectrix B-Series.
Aggiornato: maggio 18, 2026
ID: 000217157
This KB provides steps to rename a zone object. You can use these steps for all zone object types, including cfgs, zones, and aliases.
Aggiornato: maggio 18, 2026
ID: 000217021
Dopo l'esecuzione di hareboot o hafailover, lo switch mostrava l'errore "Switch is not in ready state. Abilitazione switch non riuscita. Stato dell'interruttore = 0x4". Lo stato dello switch era Disabled.
Aggiornato: maggio 18, 2026
ID: 000216994
The seccermgmt cert shows error "Is an unknown x509 format."
Aggiornato: maggio 18, 2026
ID: 000216601
Verifica di compatibilità FOS Connectrix B-Series con gli agent SMI-S
Aggiornato: maggio 18, 2026
ID: 000215554
L'output del caricamento della configurazione viene generato automaticamente con il suffisso switchname anziché con il nome file fornito dall'utente.
Aggiornato: maggio 18, 2026
ID: 000215479
When the active ports have exhausted the current POD license pool, additional ports will not be assigned a license. In such cases, manually move licenses from unused ports by releasing the POD assignment to a newly used port and reserve it.
FOS 9.x and above
Aggiornato: maggio 18, 2026
ID: 000214831
This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.
Aggiornato: maggio 18, 2026
ID: 000214361
AES256-SHA256 (0x3d) e AES128-SHA256 (0x3c) sono bloccati per TLS.
Aggiornato: maggio 18, 2026
ID: 000213633
Fabric OS 9.1.0 introduces the Fibre Channel Link Aggregation (FC-LAG) feature to provide FC-LAG capability between Brocade switches and Cisco UCS FIs that are configured in end-host mode.
Aggiornato: maggio 17, 2026
ID: 000212938
Switch policy status is critical due to WWN_DOWN.
Aggiornato: maggio 17, 2026
ID: 000212065
L'autenticazione a chiave pubblica OpenSSH fornisce accessi senza password, noti come autenticazione SSH, che utilizza coppie di chiavi pubbliche e private per l'autenticazione in ingresso. Qualsiasi utente amministratore può eseguire l'autenticazione della chiave pubblica Open SSH in ingresso.
Aggiornato: maggio 17, 2026
ID: 000211680
DCX8510-8B rebooted with error "Processor rebooted - Reset"
Aggiornato: maggio 16, 2026
ID: 000210195
wwpn of the connected device is not displayed correctly showing 0s.
Aggiornato: maggio 16, 2026
ID: 000209852
How to disable the ISLs if no longer required
Aggiornato: maggio 16, 2026
ID: 000209851
Informazioni sul modo il dashboard di analisi MyService360 integra CloudIQ Health Score nelle viste Install Base. In questo modo gli amministratori IT possono semplificare la gestione dell'integrità dei prodotti e dei servizi utilizzando i portali MyService360 e CloudIQ. Verifica dei prodotti supportati dal portale e accesso al risorse utili per CloudIQ.
Aggiornato: maggio 16, 2026
ID: 000206380
Impossibile aggiungere LUN oltre i 256 correnti sui server all'interno del dominio UCS.
Aggiornato: maggio 16, 2026
ID: 000205949
This KB article is to explain on how to add Gateway IP while using IPV6 using CLI and WebTools.
Aggiornato: maggio 16, 2026
ID: 000205218
Around December 2022 the Ports On Demand (POD) kit license activation process changed.
Aggiornato: maggio 15, 2026
ID: 000205081
Historical Port Stats collection doesn't work for some switches and SNMP data is not been received in SANnav
Aggiornato: maggio 15, 2026
ID: 000202409
Self-signed syslog switch certificates are supported in Fabric OS. as long as the certificate is created on another system (read: server) which has OpenSSL support. Or if a customer wants to have a secure syslog, it also can be a CA signed certificate.
Aggiornato: maggio 15, 2026
ID: 000202364
There is a limited number of DS-6620B, switch type 162, unable to add additional licenses. (including Pod kit)
Aggiornato: maggio 14, 2026
ID: 000201173
Questo articolo illustra la procedura per clonare una policy predefinita nella configurazione MAPS e attivare la nuova policy MAPS clonata.
Aggiornato: maggio 14, 2026
ID: 000201030