Przejdź do głównej zawartości
Uzyskaj pełny dostęp.
Zaloguj się
Utwórz konto
Uzyskaj pełny dostęp.
Zaloguj się
Utwórz konto
APEX Cloud Platform for Red Hat OpenShift image

APEX Cloud Platform for Red Hat OpenShift

APEX Cloud Platform for Red Hat OpenShift

Artykuły

Nieprawidłowe dane. Należy używać tylko liter, cyfr i znaków specjalnych z wyjątkiem <>)(%/;,=#-/*

30 z 116 widocznych
116 z 116 widocznych

W tym dokumencie przedstawiono minimalne, zalecane i najnowsze wersje kodu dla produktów Dell Technologies Enterprise i Data Center Infrastructure. Firma Dell starannie ocenia i monitoruje dane wdrożeniowe kodu, aby zapewnić, że wersje produktów spełniają nasze najbardziej rygorystyczne oczekiwania i zagwarantować naszym klientom niezawodne produkty i rozwiązania.
Zaktualizowany:  września 22, 2026 Identyfikator: 000502480

W tym dokumencie przedstawiono minimalne, zalecane i najnowsze wersje kodu dla produktów Dell Technologies Enterprise i Data Center Infrastructure. Firma Dell starannie ocenia i monitoruje dane wdrożeniowe kodu, aby zapewnić, że wersje produktów spełniają nasze najbardziej rygorystyczne oczekiwania i zagwarantować naszym klientom niezawodne produkty i rozwiązania.
Zaktualizowany:  września 16, 2026 Identyfikator: 000205512

Ten artykuł zawiera listę oprogramowania firmy Dell i powiązanych artykułów na temat uzyskiwania unikatowego identyfikatora oprogramowania (SWUID) dla każdego konkretnego produktu. Identyfikator SWUID jest wymagany do usprawnienia procesów związanych zarówno z procesem odnawiania licencji na oprogramowanie, jak i otwieraniem zgłoszenia serwisowego.
Zaktualizowany:  września 21, 2026 Identyfikator: 000296065

The VM cannot be created via OpenShift Virtualization if no default StorageClass exists in OCP cluster. Because non-default StorageClass cannot be selected for rootdisk or for the user added disks.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217665

If user set MTU for management traffic during cluster deployment or node addition process, corresponding MTU on physical switch ports needs to be set as well, otherwise network validation will fail.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217473

Dodanie węzłów roboczych za pomocą funkcji dodawania węzłów platformy Dell APEX Cloud Platform, brak informacji o sprzęcie nowo dodanych węzłów na stronie widoku Szczegóły węzła konsoli internetowej Red Hat.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217296

Błąd uaktualnienia OCP po sprawdzeniu pod kątem braku gotowości węzła lub wyłączonego planowania z powodu maszyny wirtualnej skonfigurowanej z woluminem pamięci masowej ReadWriteOnce (RWO), którego nie można migrować na żywo.
Zaktualizowany:  września 18, 2026 Identyfikator: 000216593

OCP upgrade precheck failed for dryrun drain node error, due to some VM cannot be live migrated or some pod cannot be evicted.
Zaktualizowany:  września 18, 2026 Identyfikator: 000216907

An iDRAC issue causing cluster deploy failure, the firmware and hardware inventory information cannot be returned from iDRAC.
Zaktualizowany:  września 18, 2026 Identyfikator: 000216913

This KB introduces some potential reasons that can cause OCP nodes rebooting failure during updating the OCP ingress certificate and provides suggested prechecks to mitigate the potential failure.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217058

Take VM snapshot via OpenShift Virtualization UI fails if there is IO running in the VM in OCP cluster.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217270

Due to OpenShift Virtualization limitation, VM cannot be cloned if it has disks with "hotpluggable" option enabled.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217670

One control plane node is non-gracefully shutdown, after it is powered on, it will go to "not ready" state and cause the cluster not operational.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217678

In disconnected environment (cluster in restricted networks or without internet connection), when a user tries to remove a node via Dell APEX Cloud Platform web console plugin, the process fails at step "Check if the node had bare pods".
Zaktualizowany:  września 18, 2026 Identyfikator: 000217681

LCM failed during node reboot due to CSI controller pod and depot manager pod run into deadlock.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217992

An OpenShift Container Platform issue causing cluster deploy failure, static pod status changed to completed.
Zaktualizowany:  września 18, 2026 Identyfikator: 000218328

W systemie plików pozostało mniej niż 3% miejsca.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217410

PersistentVolume zapełnia się.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217416

I-węzły PersistentVolumeInodes zapełniają się.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217417

For a cluster with consolidated control plane, the control plane node has a control plane role as well as a worker role. The KB is used to convert consolidated control plane to dedicated control plane by running a script. The script will remove the worker role from control plane nodes.
Zaktualizowany:  września 18, 2026 Identyfikator: 000219774

Interfejs użytkownika wtyczki Dell APEX Cloud Platform (ACP) umożliwia aktualizację certyfikatu ruchu przychodzącego OpenShift Container Platform (OCP) i automatyczne włączenie certyfikatu zaufanego urzędu certyfikacji do klastra OCP. Oprócz podejścia opisanego w interfejsie użytkownika ten artykuł bazy wiedzy zawiera szczegółowe informacje na temat ręcznej procedury dodawania lub usuwania certyfikatów zaufanych urzędów certyfikacji z klastra OCP, która może być niezbędna podczas wprowadzania nowych certyfikatów urzędu certyfikacji lub gdy istniejące certyfikaty zbliżają się do końca.
Zaktualizowany:  września 18, 2026 Identyfikator: 000225048

An OpenShift Container Platform (OCP) issue causing cluster deployment failure, machine-config-operator degraded.
Zaktualizowany:  września 18, 2026 Identyfikator: 000258945

W systemie plików pozostało mniej niż 3% i-węzłów.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217406

Utrzymujące się wysokie wykorzystanie procesora CPU w jednym węźle płaszczyzny sterowania, większe obciążenie procesora CPU może spowodować przejście w tryb failover; zwiększyć dostępny procesor.
Zaktualizowany:  września 18, 2026 Identyfikator: 000217405

Refer to this document to update the DNS settings in an OpenShift cluster.
Zaktualizowany:  września 18, 2026 Identyfikator: 000300745

Ekstremalnie wysoka pamięć indywidualnej płaszczyzny sterowania
Zaktualizowany:  września 18, 2026 Identyfikator: 000217404

Cluster update failed to stage firmware on node when upgrading to 03.04.01.00.
Zaktualizowany:  września 18, 2026 Identyfikator: 000300749

W tej bazie wiedzy opisano procedurę ręcznego obracania certyfikatu ruchu przychodzącego (bramy) ACP przy użyciu interfejsu wiersza poleceń.
Zaktualizowany:  września 18, 2026 Identyfikator: 000226931

After updating the certificate in the Hub cluster, it does not take effect on the nodes of the HCP managed cluster.
Zaktualizowany:  września 18, 2026 Identyfikator: 000227081

Powerflex CSI node pods are "CrashLoopBackOff" after updating OCP ingress certificate
Zaktualizowany:  września 18, 2026 Identyfikator: 000227082