Artykuły
Nieprawidłowe dane. Należy używać tylko liter, cyfr i znaków specjalnych z wyjątkiem <>)(%/;,=#-/*
30 z 588 widocznych
588 z 588 widocznych
Dowiedz się, jak utworzyć i wyeksportować kolekcję SupportAssist przy użyciu kontrolerów iDRAC9 i iDRAC10 na urządzeniach firmy Dell. Rozwiąż problemy techniczne za pomocą tej szczegółowej instrukcji.
Zaktualizowany: września 04, 2026
Identyfikator: 000126308
W tym artykule wyjaśniono, w jaki sposób przeprowadzić aktualizację sterownika lub oprogramowania wewnętrznego bezpośrednio z systemu operacyjnego (OS) za pomocą pakietów Dell Update Packages (DUP).
Zaktualizowany: września 04, 2026
Identyfikator: 000130467
This article shows How To determine why a virtual machine powered off or rebooted by reviewing log files and host details to identify guest shutdowns, user or API requests, HA resets or system faults.
Zaktualizowany: września 07, 2026
Identyfikator: 000205778
Ten artykuł zawiera informacje na temat błędu LIC008 widocznego podczas importowania licencji iDRAC.
Zaktualizowany: września 03, 2026
Identyfikator: 000353269
Dell iDRAC9 and iDRAC10 remediations for a Command Injection security vulnerability that could be exploited by malicious users to compromise the affected system.
Zaktualizowany: września 03, 2026
Identyfikator: 000504998
Jeśli kontroler LifeCycle Controller (LCC) jest włączony, ale brakuje go w menu podczas testu POST, możliwe, że konieczne będzie zaimportowanie licencji iDRAC w celu ponownego włączenia.
Zaktualizowany: września 03, 2026
Identyfikator: 000205309
Ten artykuł zawiera informacje na temat cyklu uczenia baterii. Składa się z kontrolera wykonującego operację kalibracji akumulatora w celu okresowego określenia stanu akumulatora. Operacji tej nie można wyłączyć.
Zaktualizowany: września 02, 2026
Identyfikator: 000141687
This article explains how to find supported memory configuration for your PowerEdge server.
Zaktualizowany: września 02, 2026
Identyfikator: 000135681
To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.
Zaktualizowany: września 02, 2026
Identyfikator: 000234357
This article describes the different type of controllers and the ways in which they should be reseated.
Zaktualizowany: września 02, 2026
Identyfikator: 000228521
This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server.
It is also relevant for 100% fan speeds.
Zaktualizowany: września 02, 2026
Identyfikator: 000227912
This article describes how to find the iDRAC's current MAC address.
Zaktualizowany: września 02, 2026
Identyfikator: 000226214
Most PowerEdge servers and other products that leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller. This article helps to quickly identify the iDRAC version.
Zaktualizowany: września 02, 2026
Identyfikator: 000177885
This article describes the "Easy Restore", which is a built-in storage component that maintains critical configuration information.
Zaktualizowany: września 02, 2026
Identyfikator: 000142633
This article explains how to use the Import Server License feature to import an iDRAC license from the Lifecycle Controller UI.
Zaktualizowany: września 02, 2026
Identyfikator: 000139682
Frequently Asked Questions (FAQ) about Physical Drives replacement in RAID Server and MD Arrays
Zaktualizowany: września 02, 2026
Identyfikator: 000139367
This article provides steps to troubleshoot a chassis intrusion, chassis open message for PowerEdge servers.
Zaktualizowany: września 02, 2026
Identyfikator: 000136481
This article provides information about how to delete a virtual disk using the Device Settings menu on a PowerEdge server. If your PowerEdge server is running the UEFI mode as a boot mode, the RAID BIOS is not displayed.
Zaktualizowany: września 02, 2026
Identyfikator: 000136465
This article provides information about how to disable C-States and C1E on a PowerEdge Server.
Zaktualizowany: września 02, 2026
Identyfikator: 000135039
The article describes updating Dell PowerEdge server firmware through Integrated Dell Remote Access Controller (iDRAC) 7, 8, 9, or 10. It details downloading the firmware image, logging in to the iDRAC web interface, uploading the image for installation, and managing pending updates.
Zaktualizowany: września 02, 2026
Identyfikator: 000134013
This article provides information about how to create virtual disk in eHBA mode for PowerEdge RAID Controller 10.
Zaktualizowany: września 02, 2026
Identyfikator: 000131170
This article provides information about identifying the hard driver properties in OMSA, system setup page, and iDRAC interface.
Zaktualizowany: września 02, 2026
Identyfikator: 000129559
This article explains how to restore the BIOS defaults settings on a Dell PowerEdge Server. This procedure may be valid for other Dell products.
Zaktualizowany: września 02, 2026
Identyfikator: 000128677
Poznaj różne poziomy macierzy RAID — RAID 0, 1, 5, 6 i 10 — zaimplementowane w serwerach Dell PowerEdge. Dowiedz się więcej o ich konfiguracjach, korzyściach i wpływie na nadmiarowość i wydajność danych.
Zaktualizowany: września 02, 2026
Identyfikator: 000128635
This article provides information about how to check Virtual Disk Properties in System Setup for PowerEdge Server.
Zaktualizowany: września 02, 2026
Identyfikator: 000125915
Firma Dell wprowadziła istotne zmiany w sposobie zarządzania funkcjami baterii pastylkowych (CMOS) i rejestrowania zdarzeń w tym zakresie przez serwery PowerEdge. Począwszy od serwerów 14. generacji (14G) w sierpniu 2024 r. — poprzez aktualizacje oprogramowania wewnętrznego kontrolera iDRAC i systemu BIOS — a skończywszy na platformach 15G i 16G od lutego 2025 r. — wprowadzono kilka kluczowych zmian
Zaktualizowany: września 01, 2026
Identyfikator: 000227413
W niektórych scenariuszach migracji operacja importowania obiektów docelowych OpenManage Enterprise 4.0 może zakończyć się niepowodzeniem z powodu błędu "Nie udało się odszyfrować archiwum kopii zapasowej" podczas migracji. Skorzystaj z poniższego artykułu, aby pomóc w rozwiązywaniu problemów z tym scenariuszem i różnymi sposobami rozwiązania problemu.
Zaktualizowany: września 01, 2026
Identyfikator: 000221490
Dołączane szeregowo dyski SCSI (SAS) PM1653 i PM1655 firmy Dell mogą zgłaszać nadmierne błędy klawiszy Sense 0x3, 0x11, 0x0 lub 0x4, 0x29, 0x4. Usterki te mogą powodować nieoczekiwane problemy z dyskiem.
Zaktualizowany: września 01, 2026
Identyfikator: 000222201
W poniższych procedurach opisano sposób określania mapowania gniazd fizycznych dla dysków SSD NVMe na serwerach PowerEdge z zainstalowanym systemem operacyjnym Linux przy użyciu uzyskanego raportu SOS.
Zaktualizowany: września 01, 2026
Identyfikator: 000212989
Dell PowerEdge Server remediation is available for 2026.3 Intel Platform Update (IPU) components that could be exploited by malicious users to compromise the affected systems.
Zaktualizowany: września 01, 2026
Identyfikator: 000505000