How to replace the Memory modules on a AlienwareX17 R2
Δημοσιεύτηκε Ιανουαρίου 02, 2026
This 3D experience gives you the step by step process of replacing the Memory modules and a AlienwareX17 R2. The procedure will also include removing the Base Cover and reinstalling them.
Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover to the palm rest.
Remove the screws that secure the base cover to the palm rest.
Remove the screws that secure the base cover to the palm rest.
Gently pry the base cover from the gap around the screw holes on the bottom and sides to release.
Slide the base cover off the palm rest assembly.
Memory modules
Install
Memory modules
Base Cover
Identify the base cover location highlighted in blue.
Slide the top of the base cover into place, aligning the tabs and screw holes.