Removal
Stand
Identify the stand highlighted in blue.
Press and hold down on the tab that secures the stand to the display assembly base.
Slide and lift the stand off the display assembly base.
Back Cover
Identify the back cover highlighted in blue.
Press down on the tab and slide the back cover to release.
Lift the back cover off the display assembly base.
Memory Module
Identify the memory module highlighted in blue.
Push both tabs on the DIMM door inwards, releasing it from the system board shield, then lift the DIMM door off the system board shield.
Using your fingertips, carefully spread apart the securing clips on each end until the memory module pops up.
Hold the edges and carefully lift the memory module from the memory module slot.
Install
Memory Module
Identify the memory module location highlighted in blue.
Align the notch on the memory module with the tab and slide the memory module firmly into the slot at an angle on the memory module slot.
Press the memory module down until it clicks into place.
Place the DIMM door into its slot on the system board shield and press it into place, securing it.
Back Cover
Identify the back cover location highlighted in blue.
Align the back cover to the display assembly base.
Place and slide the back cover into place on the display assembly base.
Stand
Identify the stand location highlighted in blue.
At an angle, align the tabs on the stand with the slots on the display assembly base.
Slide the stand into place into the slot on the display assembly base.