Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screw that secures the side cover to the chassis.
Pull the release latch to release the cover from the chassis.
Lift the side cover from the chassis.
Air shroud
Identify the air shroud highlighted in blue.
Hold the air shroud at the gripping points and Pull the air shroud upwards and out of the computer.
Memory Module
Identify the memory module highlighted in blue.
Use your fingertips to carefully spread apart the securing clips on each end of the memory module slot.
Remove the memory module from the memory module slot.
Install
Memory Module
Identify the memory module location highlighted in blue.
Align the notch on the memory module with the tab on the slot.
Slide the memory module firmly into the slot at an angle and press the memory module down until it secures into place.
Air shroud
Identify the air shroud location highlighted in blue.
Align the air shroud over the heat sink and system board holding and place it in the slot.
Press the air shroud down until the tabs secure into place.
Side Cover
Identify the side cover location highlighted in blue.
Align with the tabs and install the side cover on to the chassis.
Tighten the captive screw to secure the side cover to the chassis.