Passa al contenuto principale
Esci

Benvenuto in Dell

Il mio account
  • Effettua gli ordini in modo rapido e semplice
  • Visualizza gli ordini e monitora lo stato della spedizione
  • Crea e accedi a un elenco dei tuoi prodotti
  • Gestisci i siti, i prodotti e i contatti per livello di prodotto di Dell EMC tramite l'amministrazione della società.
Accedi Crea un account Accesso a Premier Accesso al Partner Program
Contattaci

I tuoi carrelli Dell.com

Numero articolo: 000123077

SupportAssist Enterprise - "Unable to configure SNMP"

Riepilogo: SupportAssist Enterprise should be able to configure automatically the remote SNMP device. In some cases this feature doesn't work and needs to be configured manually. After adding a server in SupportAssist Enterprise, the following error is displayed "unable to configure SNMP". ...

È possibile che questo articolo sia stato tradotto automaticamente. Se desideri fornire un riscontro sulla sua qualità, contattaci utilizzando il modulo in fondo a questa pagina.

Contenuto dell'articolo

Sintomi

After adding a server in SupportAssist Enterprise, the following error is displayed "Unable to configure SNMP".


SupportAssist Enterprise should be able to configure automatically the remote SNMP device. In some cases, this feature doesn't work and needs to be configured manually.


 

Table of Content

 
  1. Symptom description
  2. Option "Configure SNMP"
  3. Configure the IP target under Windows Operating System
  4. Configure the IP target under iDRAC



 

1. Symptom description

After adding a server in SupportAssist Enterprise, the following error is displayed "Unable to configure SNMP". The normal scenario is that the remote device should be automatically configured.

SLN304454_en_US__1sae0


Clicking on the error description will display this message or similar for Windows:
SNMP settings of the device could not be configured because all te configurable fields of the integrated Dell Remote Access Controller (iDRAC) are occupied.
Error code: 5000_3



 

2. Option "Configure SNMP" in SupportAssist Enterprise

As a first step, using the SupportAssist Enterprise console, please select the server and select the option "Configure SNMP".
SupportAssist Enterprise will try to apply the configuration on the remote device.

SLN304454_en_US__2sae1

If it doesn't work please go to step 3 (under Windows) or 4 (under iDRAC) to manually configure the device.
 


 

3. Configure the IP target under Windows Operating System

 
Navigate into the "SNMP Service Properties" of the Local Computer, using the "Services" Menu.
In the tab "Traps", please add the IP address of the SupportAssist Enterprise server.

SLN304454_en_US__3saewindows


A few seconds later the device should be discovered in the console and the status will move to "Ok".

SLN304454_en_US__4sae ok
 



 

 

 

4. Configure the IP target under iDRAC

Please navigate into the remote iDRAC in the menu: Overview, Server, Alerts and finally into the tab "SNMP and Email Settings".
Then, manually add the IP of the SupportAssist Enterprise server and click Apply.


SLN304454_en_US__6saeidrac
 

 

SLN304454_en_US__5icon Note: If all iDRAC destinations are occupied you will need to remove some that are no longer required.

 

A few seconds later the device should be discovered in the console and the status will move to "Ok".

SLN304454_en_US__4sae ok

If you still experience issues please contact the Dell Support.

Causa

  -

Risoluzione

-

Proprietà articolo

Prodotto interessato

Servers

Ultima data di pubblicazione

20 set 2021

Versione

6

Tipo di articolo

Solution

Torna all'inizio