Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Description

This command sets a flag on a RAID controller module to allow a new controller health image to overwrite an existing controller health image.

Syntax

set storageArray coreDumpAllowOverWrite

Parameters

None

Notes

When you retrieve a controller health image from the RAID controller module cache to a host, a flag is set on the RAID controller module to indicate that the controller health image does not need to be retrieved. This setting persists for 48 hours. If a new controller health image occurs during that period, the new controller health image is saved to the RAID controller module cache and overwrites any previous controller health image data in the cache.

You can use the set storageArray controllerHealthImageAllowOverWrite command to set the RAID controller module flag so that a new controller health image overwrites any previous controller health image. Without retrieving a controller health image, this command sets the flag by default.