Ir al contenido principal
Cerrar sesión

Le damos la bienvenida a Dell

Mi cuenta
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Iniciar sesión Crear una cuenta Inicio de sesión en Premier Iniciar sesión en el programa para socios
Contáctenos

Sus carritos de Dell.com

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Stop Physical Disk Replace

Description

This command stops a data copy operation that was started by either a set physicalDisk command or a replace physicalDisk command with the copyPhysicalDisk user input.

Syntax

stop physicalDisk replace ([enclosureID,drawerID,slotID] | <"wwID">)

Parameters

Parameter Description

physicalDisk

The location of the physical disk that is being copied before you replace it. For dense expansion enclosures, specify the enclosure ID value, the drawer ID value, and the slot ID value of the physical disk that you want to revive. For non-dense expansion enclosures, specify the enclosure ID value and the slot ID value of the physical disk that you want to revive. Enclosure ID values are 0 to 99. Drawer ID values are 0 to 4. Slot ID values are 0 to 31. Enclose the enclosure ID value, the drawer ID value, and the slot ID value in square brackets ([ ]).

physicalDisk

The World Wide Identifier (WWID) of the physical disk that you want to replace. Enclose the WWID in double quotation marks (" ") inside angle brackets (< >).

  • NOTE: The physicalDisk parameter supports both dense expansion enclosures and non-dense expansion enclosures. A dense expansion enclosure has drawers that hold the physical disks. The drawers slide out of the expansion enclosure to provide access to the physical disks. A non-dense expansion enclosure does not have drawers. For a dense expansion enclosure, you must specify the identifier (ID) of the expansion enclosure, the ID of the drawer, and the ID of the slot in which a physical disk resides. For a non-dense expansion enclosure, you need only specify the ID of the expansion enclosure and the ID of the slot in which a physical disk resides. For a non-dense expansion enclosure, an alternative method for identifying a location for a physical disk is to specify the ID of the expansion enclosure, set the ID of the drawer to 0, and specify the ID of the slot in which a physical disk resides.

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\